Rp. 0.0000
The TSA PM700 automatically scans pedestrian traffic without the need for frequent calibration. They are intended for applications where the relatively low energy emissions from 235U and 239Pu are the main concern. They are currently in use at uranium enrichment plants, weapons manufacturing plants, weapons storage sites, nuclear laboratories, nuclear waste disposal and storage sites where detection of Special Nuclear Materials (SNM) is essential.
Ease of Installation and Operation
After the initial site preparation is completed, the system can be installed and operating in less than an hour. When the system is powered up, it acquires an initial background count typically within 20 seconds. The background count is continually updated until the system is occupied. When the monitor senses occupancy, the system starts comparing the current count with the most recent background data. Alarm comparisons are made every 200ms. If the count exceeds the alarm level, both audible and visual alarms will be triggered. The system monitors itself and indicates low and high background conditions.
Standard Features
-
Programmable Detection Parameters
-
Audio and Video Indications
-
Relay Outputs for User Interface
-
Universal Power Supply
-
Ethernet Connectivity
-
Battery Backup
-
NEMA 4 Rated Enclosure
-
IP66 Rated Enclosure
-
TSA RAVEN™ Compatible
Dimensions: (H x W x D): 214 x 66 x 20 cm (84” x 26” x 8”)
Weight:
Gamma – approximately 182kg (400lbs) per pillar
Neutron – approximately 273kg (600lbs) per pillar